You're on 3DFinder
We search Thingiverse, MakerWorld, and Printables at once so you get the best of each.
Description
Simple shelf support, all attributes are parametric so just enter values that you need and print:
length - length of the support
width - width of the support
height - height of the support
screwHoleDiameter - diameter of the hole for the screw
screwHoleChamfer - chamfer for the head of the screw
leftHoleDistance - distance of the first hole from the left edge
rightHoleDistance - distance of the second hole from the right edge
counterHoleDiameter - diameter of the counter hole for the wall plug - needed when the wall plug is not fully flush with the wall
counterHoleDepth - depth of the counter hole for the wall plug
To modify the parameter values, open attached f3d file in Fusion360 and go to „Modify“ -> „Change Parameters“. Attached STL samples correspond to the shelf supports on the attached photographs with dimensions 180x15x20mm.
When slicing the model, use modifiers in your slicer to increase infill around the holes. I used 80% infill around the holes and kept standard 15% infill for the rest:
Like this model? Create a free account to save your favorites and come back to them later.
Create account