Designed for IDEA BRIMNES wardrobe with 2 doors, but probably fits many other models with the same beam.

You will need

• 6 g of PETG or PLA

Printing

• 0.2 mm layer height

• 3 walls

• 100% infill

• Ignore the slicer mesage about floating regions/overhangs

Post-processing

• Gently rotate the parts against each other until they move freely

Making the best of it

• As any print-in-place design, this one is quite sensitive to the tolerances. Make sure your filament is dry and your printer is fine tuned.