Focus was on simplicity and speed to print. 

All files can be printed with 0% infill and require only walls + top/bottom layers.

The hexagonal frame is the main component which can be arranged in any format to your liking.

There are 3 connectors:

• Frame Connector - This is to connect two coinciding frames
• Bottom Shelf Connector - This is an extended connector which allows the shelf to plug into the connector.
• Adjacent Shelf Connector - This is a shelf connector to be used between 2 frames which connects 2 frames and extension to allow the shelf to plug into.

Layer height suggestions:

• Frame: 0.3mm (Print with front of frame facing down)
• Shelf: 0.3mm (Print with top of shelf facing down)
• Connectors: 0.15 or 0.2mm

Once you've assembled the shelf, suggest a small bit of glue on the connectors to lock in the configuration. (Hoping to devise a better way to lock in the pieces without the need for glue!)