Side-Split Flow Bento Box (Remix)

I only print with low-temperature filaments such as PLA, PETG, and TPU on a BambuLab A1. Since it is located in a cabinet and I don't have a separate room for the printer, I wanted to both filter the air and remove the warm air.

ThruTheFrame with his BentoBox and DrKriegerAUS with his Split Flow version of the Fan Duct have already done the groundwork, but I need the BentoBox to stand sideways and still dissipate the air to the rear. This is how this 90° version came about.

You can find the original model here:
[https://www.printables.com/model/272525-bentobox-v20-carbon-filter-for-bambu-lab-x1c-enclo](https://www.printables.com/model/272525-bentobox-v20-carbon-filter-for-bambu-lab-x1c-enclo)
And here is the original model of the Split Flow Fan Duct:
[https://www.printables.com/model/618391-split-flow-bento-box-remix](https://www.printables.com/model/618391-split-flow-bento-box-remix)

I have only uploaded the modified fan duct here. Please use the links to support the original authors. Of course, you will need to cut a hole in the case that is no larger than the exhaust duct. It can even be slightly smaller, as the BentoBox does not really move much air.

Descrição