Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Block for connecting four PTFE tubes routed around the inside of the Original Prusa Enclosure e.g. for feeding MMU/RMU.
Printed with 0.2mm_PETG 15% infill.
Mount to enclosure using M3x18 screw and M3 nut.
Made for 4off M10 (1.0 mm pitch) pass-through couplings.
Print with the base side down. The 45dg overhangs should print nicely without any supports.
0
Curtidas
2
Downloads
Categoria
Prusa Parts & Upgrades
Tags
enclosure
ptfetube
ptfeguide
ptfetubeorganizer
ptfetubemount
ptfecoupler
ptfemount
ptfeconnector
enclosuremount
Licença
Creative Commons — Attribution — Noncommercial — Share Alike
Arquivos (1)
06.62-ptfe_block_connector_prusa_enclosure-1.0.stl
2.8 MB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta