Overview

Declutter your collection and showcase your miniature rides with this Stackable 1:32 Scale Diecast Car Platform. Designed specifically for 1:32 scale models (commonly known as "3-inch" cars), this modular display system allows you to build a custom tower to fit your space.

Key Features

• Fully Stackable: The system consists of separate panels and column supports. By stacking the columns, you can create multi-level displays.

• Modular Design: Start with a single level and print more components as your collection grows.

• Relaxed Tolerances: The joints are designed with a looser fit. This is particularly helpful when printing with challenging materials (like wood-filled PLA) that tend to warp or expand slightly.

• Secure Assembly: While the fit is relaxed for easy alignment, the parts are designed to be joined permanently with superglue for a rigid and durable final structure.

Printing Instructions

• Material: Works great with standard PLA, PETG, or specialty filaments like wood-fill.

• Settings: No special supports are required. Use standard layer heights (0.2mm works well).

• Tolerance Note: As mentioned, the tolerances are relaxed. If you find the connection is too loose for your liking, a drop of superglue will lock it in place permanently.

• The model in the photos are printed using wood pla.

Assembly Tips

1. Print all required panels and columns( atleast 4 columns per level, you can add more). The top level requires atleast 4 cap pieces.

2. Dry-fit the pieces to ensure your stack height is correct.

3. Apply a small amount of superglue to the pegs of the columns before inserting them into the panels below.