This modern two-piece planter/cachepot is designed specifically for 3D printing. The design combines a clean, minimal inner pot with a distinctive turbine-inspired textured outer shell. A matching saucer is included.

🔹 Features

• Two-part design (inner pot + decorative outer shell)

• Matching saucer included

• Modern turbine / ribbed texture

• Ideal for small plants and succulents

• Clean, sturdy, and print-friendly geometry

🔹 Print Settings

• Supports required (especially for inner overhang areas)

• 0.2 mm layer height recommended

• 3–4 perimeters for strong walls

• 15–20% infill recommended

• PLA or PETG suitable

• Support type: “Touching build plate” recommended (depending on slicer)

🔹 Scaling

Other sizes are available on request.
Planter and saucer will be scaled together to maintain proper fit and proportions.

🔹 Notes

• Not designed as a fully waterproof plant pot (material dependent).

• For better moisture resistance, use PETG or seal the inner pot.

• For private use only – no commercial selling of the files or printed parts.

Enjoy printing 🌱