Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D RC Wheel Loader - DIY por ProfessorBoots no Printables

Descrição

This is a 3D-printed RC wheel loader built using standard electronic components such as H-bridges, buck converters, and an ESP32. There is a full Length YT video below which goes over everything it can do "Such as being able to swap between multiple attachments hands free" and how I built it.

This project — along with the other models in the series — is created to provide a fun, recognizable end goal while helping users learn electronics, programming, and 3D modeling along the way.

If you 3D Print the files and decide you want to make it RC. Consider joining the professorboots workshop which gives detailed guides on sourcing parts, uploading code, and assembly.

[https://professorboots.com/products/professorboots-workshop-pass](https://professorboots.com/products/professorboots-workshop-pass)

Printables

RC Wheel Loader - DIY

ProfessorBoots ProfessorBoots (abre em nova aba)

Publicado em 13 de fev de 2026

1,028
Curtidas
3,090
Downloads
14
Impressões
Categoria RC & Robotics
Tags
rc wheel loader wheelloader
Licença Creative Commons — Attribution — Noncommercial — Share Alike
Arquivos (67)
1.) Main Color - pt1.stl 1.9 MB
2.) Main Color - pt 2.stl 2.1 MB
3.) Secondary Color - pt1.stl 5.9 MB
4.) Secondary Color - Pt2.stl 3.6 MB
5.) Interior.stl 809.4 KB
6.) TPU Tires.stl 7.1 MB
7.) TPU Fenders and Ladder.stl 312 KB
8.) Bucket.stl 248.9 KB
9.) Crane Attachment.stl 584.5 KB
10.) Log Loader Attachment.stl 9.7 MB
11.) Bucket Claw Attachment.stl 7.2 MB
12.) Sweeper Attachment - pt1.stl 1.7 MB
12.) Sweeper Attachment - pt2.stl 63.7 MB
1.) Axle Housing.stl 735.5 KB
2.) Axle Housing Cap.stl 274.7 KB
3.) Pinion Gear.stl 667.7 KB
4.) Axle.stl 903.6 KB
5.) Bearing fixture.stl 56.3 KB
6.) Axle Housing Motor Cap.stl 108.3 KB
7.) Leaf Spring.stl 134.5 KB
8.) Tire - Right.stl 1.8 MB
9.) Tire - Left.stl 1.8 MB
10.) Wheel.stl 299.9 KB
11.) Rear Chassis.stl 805.6 KB
12.) Front Chassis.stl 946 KB
13.) Flat 12v Bat Holder.stl 294.7 KB
14.) Quick Coupler plate.stl 303.4 KB
15.) Pin Push Link.stl 88.6 KB
16.) Pin - Left.stl 155.1 KB
17.) Pin - Right.stl 155.1 KB
18.) Lift Arm.stl 575.5 KB
19.) BellCrank Shaft.stl 197 KB
20.) BellCrank.stl 250.3 KB
21.) Tilt Rod.stl 138 KB
22.) Steering Wheel.stl 35.6 KB
23.) Interior.stl 809.4 KB
24.) Cab Body.stl 220.7 KB
25.) Ladder - Left.stl 52.2 KB
26.) Ladder - Right.stl 52 KB
27.) Cab.stl 156.5 KB
28.) Cab Body Top.stl 87.7 KB
29.) Rear Fender - Left.stl 66.7 KB
30.) Rear Fender - Right.stl 66.7 KB
31.) Front Fender - Left.stl 37.4 KB
32.) Front Fender - Right.stl 37.4 KB
33.) Rear Hatch Exhaust.stl 41.6 KB
34.) Rear Hatch.stl 828.1 KB
35.) Grille.stl 1023.9 KB
36.) D-Ring.stl 5.7 KB
37.) Rear Bumper.stl 271.2 KB
38.) Bucket.stl 248.9 KB
39.) Attachment Template.stl 270.2 KB
1.) Worm Gear for attachments.stl 3.7 MB
2.) Motor Lock for attachments.stl 29.8 KB
3.) Grapple.stl 502.1 KB
4.) Grapple Claw.stl 5.5 MB
1.) Sweeper Pinion gear.stl 645 KB
2.) Motor Lock for attachments.stl 29.8 KB
3.) Sweeper Housing.stl 412.2 KB
4.) Brush.stl 63.7 MB
1.) Crane Attachment.stl 361.6 KB
2.) Crane hook Stabilizer.stl 131.7 KB
3.) Hook.stl 91.3 KB
1.) Worm Gear for attachments.stl 3.7 MB
2.) Motor Lock for attachments.stl 29.8 KB
3.) Claw Bucket.stl 420.9 KB
4.) Bucket Claw.stl 3.1 MB
Ver no Printables (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora