This panel-mount bezel is designed to fit any standard 16x2 serial or parallel LCD. Designed and used in a custom PC project I built. .Skp file is include for easy modification!

Instructions

Print in PLA or ABS with a layer height of 0.25 or 0.30. 2 vertical shells with 3 solid top and bottom layers. For best results set outside perimeter speed to 50%.

The Bezel should simply snap into place and hold itself, but for added assurance use a dab of hot glue on the corners.

To modify, download the .skp file and make your changes in Sketchup!

Category: Electronics