Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
I designed this project box for my component tester but have included a blank face plate for any electronics project.
update: I uploaded a new box version with the correct screw pilot size.
Print instructions
Category: Electronics Print Settings
Printer: Anet A8
Supports: Yes
Resolution: 0.25mm
Infill: 10%
Notes:
I printed it with the face down for the main enclosure and the face plate, that way it gives a nice shiny finish for the face. If you like it can be printed in the upright orientation but will use more supports.
I made a few tweaks to the 3d model since I printed it.
14
Curtidas
146
Downloads
Categoria
Electronics
Tags
enclosure
electronics
thingiverse
electronicsenclosure
componenttester
componenttestercase
electronicsbox
projectbox
componentbox
electronicscase
electronicsproject
Licença
Creative Commons — Attribution
Arquivos (10)
2017_01_01_08_12_47.stl
363.5 KB
2017_01_04_18_24_47.stl
357.7 KB
2017_01_01_16_27_04.stl
286.1 KB
2017_01_01_07_53_28.stl
164.4 KB
2017_01_01_08_16_38.stl
17.5 KB
2017_01_01_09_21_26.stl
7 KB
2017_01_01_09_41_00.stl
63.8 KB
2017_01_01_08_20_11.stl
52.8 KB
2017_01_01_07_59_45.stl
567.6 KB
2017_01_02_09_22_45.stl
671.4 KB