Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Constrained workplace? Print just half of the arc and rotate foot by 90º.
Need wider arc? Add some middle segments!
Want to make it taller? Scale middle piece of the foot.
Now includes straight segment.
Print instructions
Print flat in abs, use acetone as glue and included jig to assemble segment. Use zip-ties to assemble.
Printables
LED bridge lamp (universal segment)
Publicado em 26 de out de 2020
95
Curtidas
274
Downloads
4
Impressões
Categoria
Home Decor
Licença
Creative Commons — Attribution — Noncommercial — Share Alike
Arquivos (24)
base_in_half_a.stl
111.8 KB
lightpipe-wider.stl
4.2 KB
end_cap_for_half-bridge.stl
26.7 KB
lbluc_foot_mountingpiece_mama_v6.stl
29 KB
desk_clamp.stl
50.3 KB
lbluc_segment_curved_onepiece_lightguide.stl
13.5 KB
lbluc_foot_mountingpiece_papa.stl
191.7 KB
lbluc-segment_set.stl
79.4 KB
base_in_half_b.stl
113 KB
lbluc_foot_height_extension.stl
81.1 KB
lbluc-segment_light_guides.stl
32.3 KB
lbluc_segment_curved_onepiece_06022017-2.stl
87.6 KB
lbluc_foot_base.stl
483.9 KB
lbluc-segment_asembly_helper.stl
39.7 KB
lbluc-straight-bottom.stl
2.4 KB
lbluc-straight-flat.stl
110.5 KB
led_channels.stl
59.7 KB
lbluc-straight-top.stl
11 KB
lbluc-straight-combined.stl
30.9 KB
lbluc-straight-right.stl
8.9 KB
lbluc-straight-left.stl
8.9 KB
lbluc_segment_straight_onepiece_160916.stl
30.9 KB
foot_v1.f3d
3.2 MB
lbluc_v38_fusion_360.f3d
7.2 MB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta