I was looking for a cute way to keep the kids excited and able to keep track of how many days until our next Disney vacation. I found a countdown but it had a few things I wanted to change on it and thought you may enjoy my rendition as well. There is a gear inside the base to make the ride vehicles go around the castle and statue.  The ride vehicles need to have tiny holes drilled in the bottoms to fit. I did not include these in the model because with how small they are it was more precise to drill a tiny hole and glue them on.  The top of the jungle cruise boat is on the plate with the train to keep colors together for less waste when printing. glue the boat roof on with the steam stack through the roof then glue on the sign to the roof, I glued the train and the car together then drilled the hole to attach to the bottom gear. There are holes in the front of the base for magnets to magnet the numbers on as well as a ledge you can glue on the front to set the numbers on instead of using so many magnets.