ℹ Tips for printing Multicolor:

• Filament: PLA

• Supports: Yes! Branch diameter 3

• Layer height: looks best in 0.16(0.15)mm / 0,2mm also works

• Wall loops: 3

• Infill: 15%

• Seam position: back

• Wall generator: -

• Detect thin walls: -

• Brim: Yes!

• BuildPlate: -

• Info‼: Do not scale the Cat any smaller otherwise some multicolor parts won't print as good

------------------------------------------------------

❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

------------------------------------------------------

Colors and filament I used (4 Color):

• PLA Matte / White

• PLA Matte / Black

• PLA Silk / Gold

• PLA Matte / Red

Or decide for yourself which colors and how many you want to use!

ℹ !!!This model is extremely filament wasteful please keep that in mind! Print this model only if you have a 3D-Printer that will not produce filament purge wastage!!!

ℹ !!!This model relies heavily on supports. You need a good printer that can handle this without any issues!!!

------------------------------------------------------

ℹ New multicolor version (3mf)! This model is no longer pre-painted in the slicer – you can now freely choose which color goes where directly in your slicer for a better look and easier handling!

(Quick tip: identical colors next to each other won’t work – always place different colors side by side to avoid potential issues.)