Skateboard to Snowskate Conversion Kit

Don't let the winter stop you from skating! This 3D printable add-on allows you to swap your standard skateboard wheels for snow blades, instantly turning your deck into a snowskate. It fits directly onto standard skateboard trucks.

Hardware Needed:

• 8x Standard Skateboard Bearings (2 per blade).

• Your existing skateboard hardware (axle nuts).

Print Settings:

• Material: PETG (Highly recommended for impact strength and cold resistance).

• Walls/Perimeters: 3 walls.

• Infill: 30% (Use a strong pattern like Gyroid or Grid).

• Quantity: Print 4 blades.

Assembly Instructions:

1. Press 2 bearings into the center hub of each printed blade.

2. Remove your current wheels.

3. Slide the blades onto the axles and secure them with your axle nuts.

That’s it - you are finished! Get out there and have fun cruising on the snow.

Here is a video of it in action! [https://www.tiktok.com/@modularmapping3d/video/7597135434736602390](https://www.tiktok.com/@modularmapping3d/video/7597135434736602390)