Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Ghostbusters Ghost Trap (1984) por Charlesworth Dynamics no Printables

Descrição

First released in 2016!

TRAP ARCHIVE.ZIP This is for anyone who made a trap before Feb 2022 and needs to reprint old parts - included in download.

PARTS Assembly hardware, greeblies, labels and Electronics Guide are available in my shop - [https://charlesworthdynamics.etsy.com](https://charlesworthdynamics.etsy.com)

ASSEMBLY GUIDES All assembly guides other than Electronics Guide is available for free on my site. [http://bit.ly/3D_Kit_Instructions](http://bit.ly/3D_Kit_Instructions)

Electronics Guide can be purchased from my shop: [https://charlesworthdynamics.etsy.com](https://charlesworthdynamics.etsy.com)

ASSEMBLY HARDWARE A complete list of hardware needed for a Standard trap (fully 3D printed) is included in the Print Guide. You can also get all hardware and Deluxe (as much real hardware as possible) upgrade parts directly from me: [https://charlesworthdynamics.etsy.com](https://charlesworthdynamics.etsy.com)

Trap Pedal is also available to print:

See my Profile for social links, where I do most update and new item announcements.

This Ghost Trap is over 55 parts designed to be fully 3D printed except for the screws that hold it all together. The trap can also accommodate electronics for lights, sound, door mechanics and smoke. The first two pictures show a Deluxe trap with as much real hardware as possible.

This is a hybrid between the GB1 & GB2 traps - overall size is GB2, the protruding cartridge is GB1.

While the trap is fully printable, it was designed based on real parts whenever possible so they can be swapped out as an upgrade. For example, 1/16" aluminum plates can be swapped out by using the 3D printed ones as a template.

To learn more about how the Trap was designed and built, see me on Tested.com:

Print Settings

Notes:

You will need a print bed that can accommodate up to 8.8" x 4" (224mm x 102mm) for longer parts, like the bottom and side plates, I have provided cut versions for smaller print beds - you will still need at least 7.3" L x 4" W (186mm x 102mm).

If you built a Trap before Feb 2022 and need to reprint something see Trap Parts ARCHIVE.zip.

All files have been run through mesh repair and are ready to print. They are oriented for optimal print quality.

To help confirm scale, I have uploaded cube_1_inch.stl and cube_20mm.stl. Load one of these cubes with the parts and confirm if it is 1" or 20mm. If so, all the parts should be at proper scale.

I'm not providing print settings since it can vary wildly from printer to printer. Certain parts, such as the handle and handle frame should use a higher infill for strength. Other parts, such as the foster connectors benefit from slower speeds. A hardware list and print guidelines are included in the download.

Trap Demo

Demo of Deluxe Trap with electronics, door mechanism and smoke.

Printables

Ghostbusters Ghost Trap (1984)

Charlesworth Dynamics Charlesworth Dynamics (abre em nova aba)

Publicado em 3 de abr de 2026

125
Curtidas
331
Downloads
Categoria Props
Tags
halloween cosplay props wand protonpack ghostbusters ghosttrap tested pke neutrona spengler adamsavage slimed keymaster afterlife venkman slimer staypuft stantz frozenempire gatekeeper charlesworthdynamics zeddemore catsanddogs gianttwinkie campwaconda dickless
Licença Creative Commons — Attribution — Noncommercial — Share Alike
Arquivos (153)
side_rt_resistor_gb2_v2.stl 161 KB
side_LT_alum_plate_LG.stl 52.4 KB
bottom_axle_x2.stl 58.5 KB
top_door_centered_STRIPES_RT.stl 53.6 KB
foster_male_insert_type_1.stl 59.8 KB
front_bottom_unit.stl 174.3 KB
foster_female_barb_x2.stl 203.2 KB
bottom_axle_x2_v2.stl 65.5 KB
cube_1_inch.stl 684 B
knob_side_post_v2_x2.stl 35.2 KB
top_door_smooth_rt.stl 44.9 KB
bottom_wheel_chock_v2.stl 15.9 KB
top_door_centered_smooth_rt.stl 44.9 KB
bottom_wheel_x4.stl 65.7 KB
side_rt_upright_frame_v4.stl 72.7 KB
side_lt_alum_plate_lg-4_hole_v2.stl 59.7 KB
top_door_centered_stripes_rt.stl 53.6 KB
front_bargraph_insert.stl 1.1 KB
side_rt_alum_plate_lg-2_hole_v2.stl 78 KB
bottom_motor_mount-smoke.stl 35.2 KB
top_door_centered_stripes_lt.stl 54.7 KB
top_door_stripes_rt.stl 54.3 KB
top_door_stripes_lt.stl 53.3 KB
handle_cap_x2.stl 28.2 KB
side_RT_panel_GB2_CUT_FRONT.stl 139.7 KB
rear_box-w-magnets_v3.stl 166.4 KB
rear_frame_v31.stl 88.9 KB
handle.stl 61.4 KB
side_rt_alum_plate_lg-4_hole_v2.stl 85.4 KB
top_door_smooth_lt.stl 44.3 KB
top_plate_v7.stl 520.9 KB
top_led_holder_v2_x3.stl 152.5 KB
side_lt_alum_plate_lg-2_hole_v2.stl 52.2 KB
knob_front_square_v2_x2.stl 16.2 KB
handle_cap_metal_x2_v1.stl 28.2 KB
handle_frame_v3.stl 140.4 KB
top_door_centered_SMOOTH_LT.stl 44.3 KB
rear_box_toggle_switch.stl 44.1 KB
top_screen_insert.stl 684 B
front_unit_prop.stl 684 B
foster_female_body_x2.stl 564.5 KB
top_screen_clamp_x2.stl 1.1 KB
side_lt_rod_half_v2_x4.stl 39.5 KB
front_bargraph_plate-no_lip.stl 50 KB
side_lt_panel_v2.stl 168.9 KB
rear_box_toggle_switch.stl 44.1 KB
foster_male_body.stl 148.5 KB
rear_box_led_shade.stl 75.1 KB
knob_front_round_v2_x2.stl 147.7 KB
side_rt_alum_plate_sm_v2.stl 22.7 KB
cube_1_inch.stl 684 B
side_lt_rod_full_x2-v2.stl 36.2 KB
front_top_unit_v9.stl 533.2 KB
front_bargraph_plate-lip.stl 74.5 KB
foster_male_insert_type_2.stl 52.8 KB
side_rt-vector_plate_gb1__gb3_v3.stl 312.4 KB
foster_male_base.stl 51.5 KB
knob_side_skirted_v7.stl 362.6 KB
side_rt-vector_plate_gb2_v3.stl 318.5 KB
side_lt_rod_half_pin_x2.stl 7.1 KB
side_rt_resistor_gb1__gb3_v2.stl 165.3 KB
cube_20mm.stl 684 B
side_lt_alum_plate_sm_v2.stl 22.7 KB
top_door_centered_smooth_lt.stl 44.3 KB
side_rt_panel_combo_v3.stl 214.3 KB
side_RT_vector_plate_GB1_v2.stl 134.2 KB
knob-front_round_POST_x2.stl 17.7 KB
front_alum_plate_v2.stl 39.2 KB
front_bottom_unit_v2.stl 176.6 KB
side_lt_upright_frame_v4.stl 23.5 KB
side_LT_panel.stl 103.2 KB
handle_cap_x2.stl 28.2 KB
rear_box-w-screws_v2.stl 187 KB
knob-side_metal_knurl_gb2.stl 2.4 MB
bottom_plate_v3.stl 406 KB
side_lt_panel_v2_cut_rear.stl 145.7 KB
bottom_plate_v3_cut_rear.stl 57.9 KB
bottom_plate_v3_cut_front.stl 365.2 KB
side_lt_panel_v2_cut_front.stl 67.6 KB
side_rt_panel_v3_cut_front.stl 99.1 KB
side_rt_panel_v3_cut_rear.stl 194.1 KB
front_wing_lt_v3.stl 46.7 KB
front_wing_rt_v3.stl 46.7 KB
front_wire_clip_v5.stl 67.9 KB
rear_box_top_plate_shade_only_v1.stl 77.5 KB
top_door_STRIPES_LT.stl 53.3 KB
foster_male_insert_type_1.stl 59.8 KB
knob-front_square_POST_x2_v2.stl 17.7 KB
bottom_wheel_chock.stl 1.6 KB
rear_box_top_plate.stl 77.5 KB
bottom_frame-MOTOR.stl 466 KB
side_RT_resistor_GB2.stl 161.4 KB
side_LT_rod_HALF_pin_x2.stl 7.1 KB
top_frame.stl 523 KB
front_alum_plate.stl 39.3 KB
rear_frame.stl 64.2 KB
front_bargraph_plate-LIP.stl 74.5 KB
bottom_frame_CUT_FRONT.stl 687.1 KB
bottom_motor_mount-SMOKE.stl 35.2 KB
side_LT_panel_CUT_REAR.stl 299.8 KB
top_door_centered_STRIPES_LT.stl 54.7 KB
bottom_frame-MOTOR_CUT_REAR.stl 119.9 KB
side_RT_panel_GB1_CUT_FRONT_v2.stl 151.6 KB
cube_20mm.stl 684 B
knob-side_skirted.stl 375.2 KB
side_RT_alum_plate_SM.stl 22.7 KB
rear_box-w-MAGNETS.stl 159.3 KB
rear_box_LED_shade.stl 75.1 KB
knob-side_metal_knurl_GB2.stl 2.4 MB
knob-side_POST_x2.stl 35.2 KB
bottom_frame_CUT_REAR.stl 120.1 KB
front_top_unit.stl 186.1 KB
top_frame_dual_outlets.stl 611.8 KB
top_door_centered_SMOOTH_RT.stl 44.9 KB
side_LT_rod_FULL_x2.stl 35.2 KB
top_door_SMOOTH_LT.stl 44.3 KB
side_RT_panel_GB1_v2.stl 103.6 KB
top_door_SMOOTH_RT.stl 44.9 KB
rear_box-w-SCREWS.stl 168 KB
top_screen_insert.stl 684 B
side_RT_panel_GB1_CUT_REAR_v2.stl 173 KB
side_RT_alum_plate_LG_GB1_v2.stl 73.9 KB
foster_female_body_x2.stl 564.5 KB
side_RT_resistor_GB1.stl 165.3 KB
side_LT_rod_HALF_x4.stl 39.5 KB
side_RT_alum_plate_LG_GB2.stl 59.8 KB
handle_frame.stl 130.3 KB
top_LED_holder_v2_x3.stl 152.5 KB
handle.stl 61.4 KB
side_RT_upright_frame.stl 13 KB
bottom_frame-MOTOR_CUT_FRONT.stl 681.9 KB
knob-front_round_x2.stl 147.7 KB
top_screen_clamp_x2.stl 1.1 KB
side_RT_panel_GB2_CUT_REAR.stl 170.8 KB
top_door_STRIPES_RT.stl 54.3 KB
side_RT_vector_plate_GB2.stl 136.4 KB
front_bargraph_insert.stl 1.1 KB
foster_male_insert_type_2.stl 52.8 KB
foster_male_body.stl 148.5 KB
foster_female_barb_x2.stl 203.2 KB
bottom_frame.stl 466.4 KB
side_LT_panel_CUT_FRONT.stl 278.5 KB
side_LT_alum_plate_SM.stl 22.7 KB
front_wing_RT.stl 46.8 KB
handle_cap-metal_tube_x2.stl 28.2 KB
side_LT_upright_frame.stl 13 KB
side_RT_panel_GB2.stl 103.6 KB
knob-front_square_x2.stl 16.2 KB
foster_male_base.stl 51.5 KB
front_wing_LT.stl 46.8 KB
front_bargraph_plate-NO_LIP.stl 50 KB
bottom_wheel_x4.stl 65.7 KB
rear_box_top_plate_full_lamp_v2.stl 51.4 KB
Ver no Printables (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora