Here is a classic in 3D tooling: the G-clamp. This model is essential for all makers who need to hold parts together during gluing or assembly.

🌟 Highlights of this design:
- Ready to use: No supports are needed for printing.
- Enhanced strength: The print profile is set to maximize the mechanical strength of the screw and frame.
- Easy assembly: The protective ball simply clips on the end of the screw.

⚙ Recommended printing settings:
- Material: PLA, PETG, or ABS (PETG is ideal for flexibility/strength).
- Infill: 100% (required so the clamp doesn't break under pressure).
- Wall loops: 4 or 5 for maximum rigidity.
- Layer height: 0.20mm for smooth threading.

📜 License information and Credits
This model is a shared upload of the original design by joehann.

Original source: G-Clamp on Thingiverse License: Creative Commons - Attribution (CC BY) Modifications: Creation of a .3mf print profile optimized