basic info 

This is a 50mm X 50mm X 7mm customizable magnet with your very own name!

It is optimized for super easy and fast printing perfect for beginners. Depending on your name and 3d printer it will take 30 to 60 minutes.

customizability 

to customize the name there are three options.

1. manually add it on any 3d design software you like - this is recommended for most people

2. go to the tally.so link enter your name and e-mail and i will edit for you - if you do not trust yourself (this may take up to 1 week for response)

tally.so link

print settings

Layer Height: 0.2 mm (0.16 mm for higher text detail)
Walls / Perimeters: 3
Top Layers: 5–6
Bottom Layers: 4–5
Infill: 15–20%
Infill Pattern: Grid or Gyroid
Print Speed: ~50 mm/s
Supports: None
Print Orientation: Flat on the build plate

buying magnet

this 3d model does not have magnets included but you can order the magnet from the amazon link or search for a 15mm circle magnet in nearby shops

amazon link

licence

This model is for personal, non-commercial use only.
You may download, print, and customize it for yourself.
Selling, redistributing, or using the model or prints commercially is not allowed without permission from the creator.

permission request