This is a practical joke, it's the warning "Do not touch" written in braille. I added another one with text as a hint.

I tested a few translators and decided to use this one: [https://www.mathsisfun.com/braille-translation.html](https://www.mathsisfun.com/braille-translation.html)

I sized the text according to the measurements given by [http://www.brailleauthority.org/sizespacingofbraille/sizespacingofbraille.pdf](http://www.brailleauthority.org/sizespacingofbraille/sizespacingofbraille.pdf):

"A Braille dot must have a diameter of 1.44 mm and a height of 0.48 mm. The distance between 2 points of the same character (horizontally or vertically) must be 2.34 mm. The center distance between 2 identical points of 2 consecutive characters must be 6.20 mm."

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.2

Infill:

Notes:

Print with a color change at the height of the first text layer. I used PrusaSlicer, which added a M600, feel free to use something else, this is not a difficult print.

The original scale matches the specification for braillie, scale it up if you want to use it a bit more comfortably.

Category: Signs & Logos