A simple stamp with a heart motive, might also be used for a defibrillator. See [https://github.com/ModischFabrications/Iconset-Modern-Medicine](https://github.com/ModischFabrications/Iconset-Modern-Medicine) for a few more icons in the same style.

The stamp has a diameter of 42mm.

3D-printing the stamp itself is certainly possible, but it's not going to work as good a you think it will. Trust me, even flexible filament is not that nice. You can try and sand it a bit to allow it to pick up the ink a little bit better, but I wouldn't bet on it.

Print Settings

Printer Brand:

Creality

Printer:

Resolution:

0.2

Infill:

Filament: Doesn't Matter PLA & TPU

Notes:

Use the svg if you want to use a laser cutter and some stamp rubber instead.

Be aware that cutting rubber is tricky, use many light passes instead of fewer heavy ones.

Power settings are for a ZING 4030.

Use this order and color code:

[1. Green: Mark(cut lightly)]

1. Blue: Engrave -> P100 S20 F0.5 (x6)
2. Red: Cut -> P60 S100 F-1 (x2)

Inset the cut a bit to get cleaner edges.

Category: Art