This is a digital 3D printable model of an Atreides Shield Generator from the movie Dune (2021).

The download contains pieces of the model ready to be 3D printed on a 200 mm print bed. All cut parts are placed on the print bed as we would print them to save you time.

Use screws to join the Printed parts with a band for your wrist. THe holes are 3,75 mm in diameter.

SIZE
At 100% scale the model’s dimensions are approximately:
Width 70 mm
Length 100 mm
Height 15 mm

3D PRINTING SETTINGS
We use these settings for most of our prints:
Layer height 0.15 mm
Infill 15%
Supports 45°
For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.

My Atreides Bullfighter statue from Dune STL: 

We try to make the models in a way that uses as little support material as possible.
This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.

Printing settings will vary greatly depending on your specific printer.

Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: [https://3d-mon.com/links/](https://3d-mon.com/links/)