Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Differentiating parts;
16x Magnets 6x2, two stacked op top of each other. (thesame size as used with gridfinity)
I used some different brass inserts I had lying around; M3xD5.0xL4.0 used in the watch mount, M3xD4.6xL5.7 used in the dowels and some terrible cheap M3 ones for the electronics tray.
I used a variety of fasteners; inbus M3x10, M3*12, M3*16 and the screws to mount the magnet mount Dm2.5x7
The steel rod I used is D4.0*90
Note; I printed all parts in PLA
TIP; print "Adjustment_Plate" and "Watch_Insert_Front" in a lower layer height, e.g. 0,1.
Links;
For the electronics parts and software, please refer to [https://github.com/mwood77/winderoo](https://github.com/mwood77/winderoo)
Winderoo wiring guide; [https://github.com/mwood77/winderoo/blob/main/docs/wiring-diagram.md](https://github.com/mwood77/winderoo/blob/main/docs/wiring-diagram.md)
OSWW build guide; [https://github.com/mwood77/osww/blob/main/instructions/build-guide.md](https://github.com/mwood77/osww/blob/main/instructions/build-guide.md)
For the assembly of the watch mount, please refer to [https://www.youtube.com/watch?v=44cPCSx3O1Y&t=110s](https://www.youtube.com/watch?v=44cPCSx3O1Y&t=110s)
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta