LED Holder for flashforge AD5X on Top of the device.

The front bracket is mounted in the original holes, the two side brackets are mounted with magnet (Ø5x4mm).The LED strip is simply pushed in. Heat shrink tubing is used at the corners to prevent the LED from being too bright. 

The cable is routed through the extruder cable. - plugged into the motherboard - Use Flashforge APP to turn the light on/off.

Supplies: 1x 24V LED strip (~1,3m), 1x 2pol wire (~0,5m), 1x JST-XH-2Y 2.54mm, 6x magnet Ø5x4mm, 2x 10mm shrink tube (~10cm)

*.3mf file for flashforge slicer, PLA black and white, 0,2mm standard