This is a simple storage box for small items like incense cones or small candy. It has six small compartments, a click-on lid and some tweezers to pick up items. The tweezers fit into the hole in the middle.

The main box has pockets on the outside, so you can put small labels on the side to mark what is in each compartment.

No assembly required - all parts come out of the print as needed.

Printing

For a standard Prusa MK4S (with High Flow 0.4mm nozzle) and the standard Prusa MINI(+) GCode for PLA material is included. PLA should be fine for most uses. If you want to use it outside in the summer - either use a very light color of PLA or use a more heat resistant material.

If you have a different printer or want a different material you can use the STLs: the main box should be printed as is standing upright. Flip the lid 180 degrees and print it on its back. The tweezers should be printed lying flat, just as the STL contains them. No supports needed, no special infill or other settings needed.

FreeCAD Design

The FreeCAD design file is included in case you want to study or modify it. It was created with FreeCAD 1.1 (release candidate). I tried to name all features in a way that makes it easy to understand.