Since I couldn't find a suitable shelf for my honeycomb wall, I had to make one myself and am now making it available to you. There were similar models available, but they were either too big or simply not very pretty.

Sizes:

I am uploading one size for you (it is the one I use). You can create different sizes using this model. Please note, however, that the shelf should not be too large. Although the angle brackets are solid, the leverage effect and the relatively small size could cause the shelf to bend. Depending on demand, I will create and upload additional sizes of the angle bracket.

Print settings: 

• 0.20 mm layer height 

• No supports

• Filament: PLA, PETG, ASA, etc. 

The model should already be rotated correctly for printing.

 Assembly:

The side of the honeycomb that was lying on the printing bed should be facing up. Yep, I don't think there's anything else to say. The rest of the assembly is self-explanatory.

If you want, you can also attach hooks or holders to the shelf that you use for your normal honeycomb wall.

Feel free to give me a rating and upload a make.

Happy printing :)