Compact Multicolor Bee Keychain | Quick Print — STL Grátis

🐝 Multicolor Bee Keychain — Quick 40-Minute 3D Print (50×55×4 mm)

Bring a little buzz to your day with this 3D-printable multicolor bee keychain. A cute and compact accessory designed for quick, clean printing on AMS or multi-material setups.
Perfect for backpacks, keyrings, or as a thoughtful handmade gift, this model combines smooth color transitions with a durable, support-free design.

✨ Optimized for Real-World 3D Printing

This model has been carefully tuned for practicality and reliability:

Fast, efficient print — about 44 minutes total on a Bambu Lab printer using standard speed profiles.
No supports needed — the geometry is designed to print perfectly flat and self-supported.
Clean multi-color transitions — purge-optimized model reduces filament waste and keeps your build plate tidy.
Durable structure — 3 perimeter walls and solid infill where needed for daily handling.
Smooth finish — top layers print beautifully with ironing enabled for a professional touch.
AMS-ready — works great with 3-color setups for vibrant, layered detail.

🖨 Recommended Print Settings (start here)

Setting	Recommendation
Material	PLA (tested with Bambu Lab PLA Basic)
Colors used	Sunflower Yellow • Cocoa Brown • Jade White
Layer height	0.15 mm
Walls / Perimeters	3
Ironing	Enabled for top surfaces
Wall order	Exterior → Interior
Supports	None
Print time	~40 minutes
Build size	50 × 55 × 4 mm
AMS / Multicolor	Enabled — 3-color setup recommended
Purge optimization	Built into model layout

🌈 Perfect Use Cases

Cute keychain or backpack charm
Small gift for makers or friends
Multicolor test print for AMS setups
Fast “weekend print” project
Decorative tag or craft accessory

🔧 Print Tips & Multi-Color Options

For best color clarity, load Sunflower Yellow as the main body, Cocoa Brown for stripes, and Jade White for wings.
If you’re using AMS, preheat secondary filaments to reduce purge waste.
Optional: use ironing only on top surfaces — it makes the wings shine beautifully.
If adhesion is weak, add a small brim (not usually required).
For single-extruder printers, you can manually pause for color swaps at layer transitions.

🐝 Notes from the Maker

This keychain was designed with simplicity and quality in mind. Smooth lines, bold colors, and reliable print performance.
Whether you’re testing your AMS color alignment or just want a cheerful addition to your keyring, this bee is small, strong, and ready to fly!