This is a full set of flat Cherry MX keycaps made to work with standard mechanical keyboards. I designed these because I wanted clean, simple keycaps that I could 3D print myself instead of buying expensive ones, and I use them on my Higround Basecamp 75+.

The keycaps have a flat top design (no sculpting), so every key feels the same across the board. It gives the keyboard a smooth, modern look and feels nice for both typing and gaming. The set is blank with no legends on purpose, keeping it minimal and making printing easier and cleaner.

All keys use standard Cherry MX cross stems, so they should work with most mechanical switches and layouts. As long as your keyboard uses standard MX sizing, these caps should fit just fine.

How I Printed Them

I printed these in PETG, since it’s easy to print and looks good, but PETG should also work. Each keycap is designed to be printed upside down (stem facing up) so the top surface comes out clean. You shouldn’t need supports if your printer is dialed in.

What Settings I used:

• Layer height: 0.1 mm (The Lower The Smoother)

• Infill: 100% so they feel solid

• Brim: optional, helps with smaller keys

Extra Notes

This is mainly for personal use and for fun, so feel free to remix or tweak things like height or stem tolerance. If a key feels tight or loose, You want to add something to it, or edit it in anyway. Always feel free :)

If you print these, post a make. I'm really curios for how they'll turn out for other people.