Note: this comes with a hanger designed for Polymaker spools. Prusament and others also work but not as ideally, but some do not work at all. Usually you can just edit with width of the spool to get something that works. This can be done in the included fusion 360 file.

Required hardware: 2 screws per hanger. I use #4  wood screws, mounting holes are 3.5mm diameter.

The included jig can be used to align and space the cleat back from the edge by 50mm. I have included the fusion 360 file for editing so you can adjust this spacing or anything else you need. 

Parts come as assembly in 3mf file, you will have to separate them in your slicer.