Divider for Mini-Master Spool

I love the idea behind MasterSpool ([https://www.thingiverse.com/thing:2769823](https://www.thingiverse.com/thing:2769823)) and also the smaller one which i found here by User zzet called Mini MasterSpool ([https://www.prusaprinters.org/de/prints/64294-mini-master-spool](https://www.prusaprinters.org/de/prints/64294-mini-master-spool))

Since i had some filament samples at home which i wanted to use seperately, i created this additional seperator for the Mini-MasterSpool. It fits right on the Spool and is locked in place so everythin on the spool turns with it.

Latest update V03: chaned dimensions a little responding to some feedback to the design. Since V02 workes perfectly for me, i leave the files online as well.

Let me know if you have further suggestions!

Happy Printing!

----------------------------------------------------------------------------------------------------------------

Dimensions:

V03:

inner hole	55,4mm
outer diameter	135mm	little smaller than Mini-MasterSpool
thickness divider	1,4mm	thin and with little flex
overall thickness	20,4mm	~ half of the Mini-MasterSpool

V02:

inner hole	55,2mm	tight fit on Mini-MasterSpool
outer diameter	135mm	little smaller than Mini-MasterSpool
thickness divider	1,0mm	thin and with little flex
overall thickness	20,0mm	half of the Mini-MasterSpool

----------------------------------------------------------------------------------------------------------------

Print settings:

Filament: PLA

Layerhight: 0,2mm

Supports: NO

Infill: NO

----------------------------------------------------------------------------------------------------------------

Version log:

V03	14.04.2022	Increased inner Diamer and thickness of the divider
V02	18.03.2022	Added filament retentsion holes for multiple filament strings
V01	--	Can be seen in the picture, this spool is in use. Not published.
V00	--	first Design Idea, not published.

Descrição

Dimensions:

V03:

V02:

Print settings:

Version log: