• Est. Print Time: 10 h (Bambu X1C/P1S) 
• Est. Filament Use: 350 g 
• Largest Piece: 118 mm x 65 mm 

Printing Instructions: 

Print all files as oriented using your standard settings. For all files make sure you have good adhesion and use brims if your corners are lifting. 

• Print 4 Pots, and 4 Pot Rims in the same color. 
• Print a Pot top for each player color, make sure not to add supports or a brim to ensure the numbers print well on the bottom side. 
• Print 1 each of Cards and Cards Lid. The lid needs to print top down with no supports or brim, and will print a nice design on the lid. 
• Print 1 Pentagram and 2 Circle lids and 3 Hexagon Lids. They should fit nice and tight and not come loose if shaken. 

Lid fit: The lids are all designed to be printed flat side down, and are held on by tension. If you find them too tight or too loose you can reprint .1-.2 mm larger in the X and Y directions. Make sure to manually adjust the X and Y measurements and unlock scaling so it doesn’t scale the rest of the model. Be aware that it will slightly loosen over time, so err on the side of tight. Make sure your adhesion is good for best results. 

Assembly: Glue the Pot rims to the tops, let fully dry in a well ventilated area before storing to avoid glue residue buildup. (It is not necessary to glue, as long as the lids are tight it will hold the top on)

Happy Gaming!

________________________________________________________________________________________

Check out all my free designs here on Printables! If you want to support my work and all of the free designs I bring to the community consider buying something from my Etsy shop or my Printables Store.