Foutraleque (/fʊtʀalɛkə/ foot-rah-lek) is a durable multi-purpose compact container, good for carrying small stuff in pockets, backpacks or on a string.

Designed to be printed in place. Comes in various sizes, defined by inner diameter and inner height. For instance, Foutraleque 30×80 has inner diameter 30 mm and inner height 80 mm.

Various sizes of Foutraleque are good for storage of:

• Pills (18×60)
• Cigarettes and prerolls (where legal) (16×100, 18x85, 18×100)
• Coins and banknotes (30×80)
• Headphones and cables (28×65, 30×70)
• Cotton swabs (20×80)
• Stainless steel shot glasses (40×60)

Update 2022-04-09: 
Some users reported problems opening the initial version of the container after printing. 
The new version is printed in an opened position. Supports are part of the STLs (the parts with hexagonal holes), thus, no supports need to be added in slicer.
For multicolor printing, use the print-closed version, available here: [https://drive.google.com/file/d/1XEXMHYwiaNqmLRv3aV5PzTcv-RBOF3El](https://drive.google.com/file/d/1XEXMHYwiaNqmLRv3aV5PzTcv-RBOF3El)

Print Settings

Printer Brand:

Prusa

Important: 
If Arachne perimeter generator in PrusaSlicer is enabled, set “Advanced” → “Arachne Perimeter Generator” → “Minimum perimeter width” to 50 %

Printer: 

I3 MK3S

Rafts:

Doesn't Matter

Supports: 

No

Resolution:

0.15 mm

Infill: 

10 %

Filament: 
PETG

After printing

Remove supports (the parts with hexagonal holes)

Category: Accessories