Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 130x170mm in size

Filaments Used:
PLA Black 
PLA BambuLab Basic Red 
PLA BambuLab Basic Yellow  
PLA White
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Red
At layer #16 (1.36mm) swap to Yellow
At layer #23 (1.92mm) swap to White for the rest.

Frame Version:
At layer #26 (2.16mm) swap to Yellow for the rest.