Drow - Print-Ready Miniature by Mike Gyver Minis! ⚔🎲

Capture the sinister elegance of the Underdark with this cunning Drow miniature, poised with its gleaming, poisoned blade ready to strike.

Part of my project building high-quality, print-ready D&D (and other TTRPG) miniatures, perfect for your campaigns! 🐉
 

 ⭐ Why Mike Gyver Minis? ⭐

• 🎨 Designed for Printability: Sculpted and optimized for successful prints on common 3D printers.
• 🔬 Rigorously Tested: Printed successfully multiple times on Bambu Lab X1C/P1S & K2 Plus (see photos for real print results!).
• ⚙ Ready-to-Print Files: Includes my tuned.3mf project file (most modern slicers like Bambu Studio/OrcaSlicer) with optimal orientation and tested FDM support settings configured! Also includes an unsupported .stl.

💖 A FREE Preview of What's Coming Soon! 💖

This model is a preview of the new Print-Ready standard for Mike Gyver Minis, complete with my tested .3mf file! I'm currently working hard behind the scenes to launch my full, organized Patreon Library (with eventually hundreds of models & 1-on-1 support) in a month or so. Stay tuned! For now, please enjoy this free model!

Don't worry my miniatures will always be FREE.

Explore All My Free Model Sites & Follow Me:➡[https://linktr.ee/mikegyverminis](https://linktr.ee/mikegyverminis)🔗

*Spend less time troubleshooting, more time playing!* 🎉

🛠 Print Settings & Advice 🛠

• Printer Used for Testing: Bambu Lab X1C / P1S / K2 Plus (CoreXY)
  • *Note: Tested extensively on these machines. Results may vary based on your printer type, calibration, and filament.
• Supports: Yes - Use Included .3mf File (Recommended!)
• Layer Height: 0.08mm
• Infill: 10-15% Gyroid
• Filament: PLA / PLA+ (Tested with Bambu PLA Basic Blue Grey and Elegoo PLA Space Grey)

🔥 Important Printing Advice:

1. Prep Matters! 🔑:** A Calibrated printer, Clean build plate (🧼 soap & water!),and Dry filament (💧➡🔥) are essential for success!
2. Support Removal: 

•  **COOL DOWN COMPLETELY** first! 🥶
• Use tweezers/cutters ✂ carefully, starting at the base/brim. Pull supports *down & away*.
• Be extra gentle on thin parts like the Sword, feet and Other hand. 👀 Slow is smooth! Minor cleanup (light sanding) where supports touch the model is normal. 
  
  Assembly (If Applicable): Assemble [Number] parts with Super Glue. Optional: fill seams with putty (Green Stuff/Milliput) before priming. 💪

⚙ .3mf File Info:

Includes model pre-oriented with tested FDM support settings for most modern slicers like Bambu Studio/OrcaSlicer/Prusaslicer