Mini Fire Hydrant - Desk Decor — STL Grátis

Bring a piece of the city into your workspace.
This compact fire hydrant model is quick to print, fun to paint, and instantly recognizable — great as a desk decoration, diorama prop, or photography accent.

It’s modeled for clean lines and easy support removal, with smooth curvature that looks sharp right off the plate. A perfect little “filler print” between big projects or a great starter for beginners learning slicer basics.

Print one for your shelf, your pet’s photo setup, or your miniature city display.
Fast, sturdy, and surprisingly satisfying to hold.

🧰 Print Settings

Printer: Any FDM printer
Material: PLA (recommended) / PETG optional
Nozzle Size: 0.4 mm
Layer Height: 0.20 mm (0.16 mm for a smoother dome)
Walls/Perimeters: 3
Top/Bottom Layers: 5 each
Infill: 18 % Gyroid
Supports: Build plate only
Adhesion: Brim (3–5 mm) recommended
Orientation: Print upright (base on plate)
Cooling: 100 % after first few layers
Estimated Time: ~1 h 45 m
Filament Used: ~6.6 m / ≈20 g
Cost: ≈ $0.50
Difficulty: Easy

🖌 Finishing Tips

Light sanding on the dome and rim smooths layer lines beautifully.

Apply gray filler primer before paint for a flawless matte finish.

Red spray + black wash brings out the bolts and depth.

Optional: scale up for full prop use, or down for tabletop scenery.

Descrição

🧰 Print Settings

🖌 Finishing Tips

Mini Fire Hydrant - Desk Decor