If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at [https://patreon.com/29flo](https://patreon.com/29flo) and subscribe to a membership tier that suits you. 

This time I present to you a set of chess pieces styled in a dark, gothic atmosphere. Adorned with spikes, skulls, and everything that dark minds love the most :)

If possible, print them in resin! The pieces have a lot of fine details.
Although even an FDM print with a 0.4mm nozzle and 0.08–0.1mm layer height came out very nicely.

If you can, also use a high infill to give the pieces a desirable feeling of weight.

[ Suggested Print Setup for 6-10cm figurines ]

Nozzle: 0.4mm
Layer Height: 0.1mm
Infill: 50% or more - for nice feeling of weight
Wall loops: 2
Supports: Tree (auto)
Threshold Angle: 30 ( 40 for Knight )
Printed with: 
- PLA Matte Charcoal + Metallic Paint

These photos are real and show an actual 3D-printed figure photographed by me.

As always!
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.