Ir para conteúdo
3DFinder
Iniciar sesión

Estás en 3DFinder

Buscamos en Thingiverse, MakerWorld y Printables al mismo tiempo para darte lo mejor de cada una.

Buscar más como este
Modelo 3D Stackable Gridfinity Tote Remix por wsreith en Printables

Descripción

Need a taller tote for my gridfinity bin storage and tried to reduce filament usage by removing magnet support. I ended up with a rather parametric design so I went ahead and uploaded a few different sizes. Solid side and hex variants are provided along with a basic lid and one with a decorative groove. 

  • 5x4x18u

  • 5x4x12u (original tote)

  • 4x4x18u

  • 4x4x12u

  • 3x3x12u

  • 3x3x9u

The stacking geometry is slightly changed but it is still compatible with the original tote.

I didn't trust the bridging on the handle so I painted snug supports inside the handle that pop right out after printing.

update 2026-01-02: uploaded 6x6x30u and 8x8x42u hex totes as a joke.

Printables

Stackable Gridfinity Tote Remix

Publicado el 2 de ene. de 2026

22
Me gusta
74
Descargas
1
Impresiones
Categoría Organizers
Etiquetas
storage stackablecontainer tote gridfinity
Licencia Creative Commons — Attribution — Noncommercial — Share Alike
Archivos (20)
gridtote_5-4-18_hex.stl 3.1 MB
gridtote_5-4-18_solid.stl 2.4 MB
gridtote_5-4-12_hex.stl 2.8 MB
gridtote_5-4-12_solid.stl 2.4 MB
gridtote_5-4_lid.stl 2.6 MB
gridtote_5-4_lid2.stl 2.7 MB
gridtote_4-4-18_hex.stl 2.6 MB
gridtote_4-4-18_solid.stl 2 MB
gridtote_4-4-12_hex.stl 2.3 MB
gridtote_4-4-12_solid.stl 2 MB
gridtote_4-4_lid.stl 2.3 MB
gridtote_4-4_lid2.stl 2.3 MB
gridtote_3-3-12_hex.stl 1.6 MB
gridtote_3-3-12_solid.stl 1.4 MB
gridtote_3-3-9_hex.stl 1.6 MB
gridtote_3-3-9_solid.stl 1.4 MB
gridtote_3-3_lid.stl 1.7 MB
gridtote_3-3_lid2.stl 1.7 MB
gridtote-6-6-30_hex.stl 10.7 MB
gridtote_8-8-42_hex.stl 18.1 MB
Ver en Printables (abre en nueva pestaña)

¿Te gusta este modelo? Crea una cuenta gratis para guardar tus favoritos y volver a ellos más tarde.

Crear cuenta