I wanted some larger toolheads for my new DSPIAE sander and came up with this initial set. These work very well for me and are a nice start at developing a more complete toolhead set than provided by the manufacturer of this neat little reciprocating sander.  I'll be adding more toolhead variants here as I come up with them, so check back in the future if you find these useful.

I used some thin light duty Velcro tape, hook side (links below) on the toolheads and some loop backed light sanding paper to allow easy sand paper changing.  I also print up a bunch of the same size toolheads that allows me to load up a progressive set of grits and quickly swap toolheads as progressing up the progression.

I print these with PETG and they work perfectly printed at a 0.2 height.  But I print them at 0.12 which result in something resembling the factory molded parts.

[https://www.amazon.com/dp/B0013AIAQ2?ref=ppx_yo2ov_dt_b_fed_asin_title](https://www.amazon.com/dp/B0013AIAQ2?ref=ppx_yo2ov_dt_b_fed_asin_title)

[https://www.amazon.com/dp/B0DFC8BSQ3?ref=ppx_yo2ov_dt_b_fed_asin_title](https://www.amazon.com/dp/B0DFC8BSQ3?ref=ppx_yo2ov_dt_b_fed_asin_title)