This model can be used to mount a beamer to the wall. 

You will also need one screw (body diameter ≤ 4mm < head diameter) and cable ties (5mm wide, 2mm thick).

Assembly

For assembly, first add the two connectors to the mount_base and unfold them. Then, pinch the connectors and press them into the wall_mount. This requires a good amount of force and a material that offers some flexibility, like PETG. Finally, press the mount_base towards the edge of the wall_mount to lock it in. For additional safety, you may also want to insert the stabilizer_rod into the side, preventing the connectors from falling out of the wall_mount.

The beamer_adapter can be unfolded and put onto the base of the beamer, where it can be tied together with cable ties. (I am not really satisfied with this solution, but it works).

The beamer_adapter and the mount_base can be joined together and locked in by the pin. First, screw the pin into the mount_base loosely, then slide the beamer_adapter into position. Now, fasten the pin with a flathead screwdriver.

Additional Features

• The beamer_mount can be rotated and tilted.
• The mount_base can be folded up to save space when not in use.

Disclaimer

Use this at your own risk. No liabilities will be taken.