I needed big drawers but could not find any, so I made the biggest possible to be able to print on CORE One

Changeable Dividers so you can decide size of compartments

Added stopper to the back to prevent drawers falling, but works only while tilting the drawer, otherwise the frame should be thicker

Putting frame together needs m10 nuts and bolts (or glue)

Drawers and top plate needs glue

Frame: 316 x 291,5mm

Box: 282 x 282

Print:

Frame:

PETG 0.25mm (HF0.4 nozzle)

30% Adaptive Cubic

Nozzle temp: 232 C°

3 Perimeters

Fan speed 65%

Bridges fan speed 75%

Filament overrides:

Retraction length: 1.2mm

Retraction speed: 52mm/s

Wipe while retracting: On

Retract amount before wipe: 22%

(All may not be necessary, but that's how I get it printed)

Drawer:

PLA 0.25mm

Basic settings

There is 3mf for tall drawers that have variable layer height for locks. Visible lines (see pic) but saves time..