Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
I needed corner protectors for transporting a table top, ended up designing these. You need two per corner, print on the flat side without supports.
These will work for boards of 20mm thickness or more as the inset part is 10mm deep.
Sandwitch the table corner and use zip ties, you can use dual sided adhesive tape for added stability.
Printing
- PLA or PETG
- Nozzle: 0.4 mm
- Layer Height: 0.2 mm
- Infill: at least 15%, but I recommend 25%
- Vertical Shells: 3
- Top/Bottom Layers: 5
- Supports: No
2
Curtidas
6
Downloads
Categoria
Other House Equipment
Licença
Creative Commons — Attribution — Noncommercial
Arquivos (1)
table_corner_protector.stl
12.8 KB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta