Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 158.82x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.3mm and the Actual Depth is 1.4mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Spectrum Basalt Grey Transmission Distance: 0.6
PLA HIGH SPEED 3DPower Telegrey Transmission Distance: 3.1
PLA HIGH SPEED 3DPower Pure White Transmission Distance: 2.3
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Basalt Grey
At layer #9 (0.8mm) swap to Telegrey
At layer #13 (1.12mm) swap to Pure White for the rest.