Ir para conteúdo
3DFinder
Iniciar sesión

Estás en 3DFinder

Buscamos en Thingiverse, MakerWorld y Printables al mismo tiempo para darte lo mejor de cada una.

Buscar más como este
Modelo 3D Gridfinity Modular Drawer System por Nimrod Ben Yossef en Printables

Descripción

🚨READ BEFORE PRINTING🚨 

Gridfinity Modular Drawer System 🧩 

Take your Gridfinity setup to the next level with this fully parametric modular drawer system, designed for customization, strength, and style.

Included Models 📦 

Each drawer size includes:
- 🧺 Drawer – 1 version per grid size.
- 🧊 Shells – 4 types per size:
  - Bottom
  - Middle
  - Top
  - Single-piece
- 🦶 Universal Feet – One model fits all shells, and should be glued to its designated spot on the bottom drawer.
- 🍽 Gridfinity Top Plate - 1 version per grid size (for widths of 2 units or less, Gridfinity Top Plate is not possible)
Sizes range from 2×2 to 4×4 grid units (widths smaller than 2 units are not possible). The first number in the file name is its width, and the second one is its depth. All provided drawers are designed with:
- 100mm drawer height
- 20mm arc radius

Printing Tips 🖨 

- Support-free design except for the drawer handle.
- Designed with efficient printing in mind — but expect large filament usage depending on your size.
- Print the shell and the drawer out of PLA, and the feet out of TPU.

Key Features 💡 

Fully Parametric Design 📐 

- In case the sizes I’ve provided don’t suit your needs, create drawers in any size you want — from a 2×1 all the way to ♾×♾.
- Easily tweak:
  - Drawer height
  - Arcs’ size (how wide they are). Note: when you change the arcs’ size, beware - if you will change it to half of the drawers’ height, in case you’ll want to change it to anything smaller, issues will occur. 
  - Grid size
- All done via the included Fusion 360 file, with user-friendly parameters. 

Sliding Locking Mechanism 🔐 

- Drawers connect horizontally using a jigsaw puzzle-style sliding rail.
- Once connected, lock them in place with the built-in locking teeth — no accidental slide-outs.

Drawer Locking Mechanism 🛝 

 Just slide the drawer all the way into its shell, drop it down, and it slides into a track that stops it from coming back out until lifted. Clean and satisfying.

Built-in Gridfinity Base 🧱 

Every drawer comes with an integrated Gridfinity baseplate — this defines its size and makes it plug-and-play with your existing system.

Compatibility 🔗

All The sizes are compatible with one another. 

Printables

Gridfinity Modular Drawer System

Nimrod Ben Yossef Nimrod Ben Yossef (abre en nueva pestaña)

Publicado el 15 de jul. de 2025

46
Me gusta
94
Descargas
Categoría Organizers
Etiquetas
organizer organization drawer drawerorganizer gridfinity
Licencia Creative Commons — Public Domain
Archivos (53)
2_By_2_Drawer.stl 2 MB
2_By_2_Shell_With_Male_Slots_Only(Top).stl 166 KB
2_By_2_Shell_With_Female_Slots_Only(Bottom).stl 293.5 KB
2_By_2_Shell_Without_Male_Nor_Female_Slots(Single).stl 256.3 KB
2_By_2_Shell_With_Male_&_Female_Slots(Middel).stl 204.4 KB
2_By_3_Drawer.stl 2.1 MB
2_By_3_Shell_With_Male_Slots_Only(Top).stl 187.9 KB
2_By_3_Shell_Without_Male_Nor_Female_Slots(Single).stl 274.1 KB
2_By_3_Shell_With_Male_&_Female_Slots(Middel).stl 226.4 KB
2_By_3_Shell_With_Female_Slots_Only(Bottom).stl 311.3 KB
2_By_4_Drawer.stl 2.2 MB
2_By_4_Shell_With_Male_&_Female_Slots(Middel).stl 219.9 KB
2_By_4_Shell_With_Female_Slots_Only(Bottom).stl 299.5 KB
2_By_4_Shell_Without_Male_Nor_Female_Slots(Single).stl 262.3 KB
2_By_4_Shell_With_Male_Slots_Only(Top).stl 181.4 KB
3_By_2_Drawer.stl 2.6 MB
3_By_2_Gridfinity_Top_Plate.stl 423.6 KB
3_By_2_Shell_With_Female_Slots_Only(Bottom).stl 278.9 KB
3_By_2_Shell_Without_Male_Nor_Female_Slots(Single).stl 241.7 KB
3_By_2_Shell_With_Male_Slots_Only(Top).stl 159.7 KB
3_By_2_Shell_With_Male_&_Female_Slots(Middel).stl 198.1 KB
3_By_3_Drawer.stl 2.7 MB
3_By_3_Gridfinity_Top_Plate.stl 602.6 KB
3_By_3_Shell_With_Male_&_Female_Slots(Middel).stl 218.1 KB
3_By_3_Shell_With_Male_Slots_Only(Top).stl 179.6 KB
3_By_3_Shell_Without_Male_Nor_Female_Slots(Single).stl 257.4 KB
3_By_3_Shell_With_Female_Slots_Only(Bottom).stl 294.6 KB
3_By_4_Drawer.stl 2.9 MB
3_By_4_Gridfinity_Top_Plate.stl 756.7 KB
3_By_4_Shell_Without_Male_Nor_Female_Slots(Single).stl 249.8 KB
3_By_4_Shell_With_Male_Slots_Only(Top).stl 174.2 KB
3_By_4_Shell_With_Female_Slots_Only(Bottom).stl 287.1 KB
3_By_4_Shell_With_Male_&_Female_Slots(Middel).stl 212.6 KB
4_By_2_Drawer.stl 3.2 MB
4_By_2_Gridfinity_Top_Plate.stl 542.1 KB
4_By_2_Shell_Without_Male_Nor_Female_Slots(Single).stl 229.3 KB
4_By_2_Shell_With_Male_Slots_Only(Top).stl 153.6 KB
4_By_2_Shell_With_Male_&_Female_Slots(Middel).stl 191.9 KB
4_By_2_Shell_With_Female_Slots_Only(Bottom).stl 266.5 KB
4_By_3_Drawer.stl 3.4 MB
4_By_3_Gridfinity_Top_Plate.stl 756.4 KB
4_By_3_Shell_Without_Male_Nor_Female_Slots(Single).stl 248 KB
4_By_3_Shell_With_Male_Slots_Only(Top).stl 174.4 KB
4_By_3_Shell_With_Female_Slots_Only(Bottom).stl 285.3 KB
4_By_3_Shell_With_Male_&_Female_Slots(Middel).stl 212.9 KB
4_By_4_Gridfinity_Top_Plate.stl 989.5 KB
4_By_4_Drawer.stl 3.7 MB
4_By_4_Shell_With_Male_&_Female_Slots(Middel).stl 207.4 KB
4_By_4_Shell_With_Male_Slots_Only(Top).stl 169 KB
4_By_4_Shell_With_Female_Slots_Only(Bottom).stl 277.7 KB
4_By_4_Shell_Without_Male_Nor_Female_Slots(Single).stl 240.5 KB
Gridfinity_Modular_Drawer_System_PARAMETRIC v28.f3d 2.7 MB
Soft_Feet.stl 975.3 KB
Ver en Printables (abre en nueva pestaña)

¿Te gusta este modelo? Crea una cuenta gratis para guardar tus favoritos y volver a ellos más tarde.

Crear cuenta
Comparar ahora