The System

These containers are designed for the assortment boxes from AuerPackaging. You can find them here: [https://www.auer-packaging.com/de/de/Sortimentsboxen.html](https://www.auer-packaging.com/de/de/Sortimentsboxen.html)

My Printtime

The bins are designed for a 0.4 Nozzle. I recommend support around the feet to get a good print.

• 0.5x1
  • my printtime: 1h 33min (layerhight 0.28, with support)
• 1x1 half height
  • my printtime: 1h 10min (layerhight 0.28, with support)
• 1x1 original
  • my printtime: -not yet printed-

Historie

• 16.02.2022 - Upload (0.5x1)
• 12.04.2022 - Added half-height bins (½-1x1 ; ½-1x2 ; ½-1x3 ; ½-1x4 ; ½-2x2)
• 18.05.2023 - Added half-height  half width bins (0.5x1 half height)
• 22.12.2023 - Added original 1x1 bin (full height, full width)
• 26.10.2024 - Correction of the original 1x1 bin (was not full depth)

The best part of designing is to share Ideas and see others enjoy them. It would be great to see your makes and get some feedback.