Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
A simple angle guide you can put on the corner of the whetstone to help holding a steady angle.
I suggest to print it in TPU with the numbers down. You can use any material, but PLA is really hard and can scratch the knife.
Let me know if you need other angles.
4
Curtidas
35
Downloads
1
Impressões
Categoria
Kitchen
Tags
sharpening
whetstone
Licença
Creative Commons — Attribution — Noncommercial
Arquivos (2)
angle guide 15.stl
90.3 KB
angle guide 20.stl
159.4 KB