Would you like to support my work? :)
Check out my  full catalog with exclusives, early access and commercial licences.
— 

A creative hanging planter for your home or garden. 

What you need:

• The 3d printed thing

• Yarn with about 3mm in diameter (can be flax, hemp, whatever)

The assembly instructions are in the images.

Size: 90 × 80 × 170 mm

Print settings

Required build volume: 90 x 90 x 180 mm

Material usage: 110g

Print time: 10h

Material: PLA

Print direction: stl is rotated correctly, check images

Support: none

Nozzle size: 0,4 mm

Line width: 0,4 mm

Layer height 0,2 mm – 0.28 mm

Outer walls: 3

Infill: 15%

Build plate adhesion type: brim

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.