When 3D scanning non-standard shaped parts, I encountered the need for stands of different heights. Therefore, it was decided to model stands with variable height.

As a result, we got 4 types of stands of different heights and with different lifts:
50-80 mm;
70-120 mm;
100-180 mm;
120-220 mm.

For assembly, you will need to print 4 parts, and you also need m3x10 screws (you can use up to 20 mm) - 4 pcs.

3D printing settings

I printed:
wall thickness - 3 lines:
layer height - 0.2 mm;
fill - 10%;
Supports are needed only for the screw part, but if your bridges print well, you can do without supports.