This camera cage can accommodate cameras with maximum dimensions of 140x160mm by installing the handle extensions, while cameras up to 140x115mm can be mounted without the extensions.

Some technical details:
Printing material: SUNLU PLA+ v2
Infill: rectangular, 30%
Brim: yes
Supports: tree, only for the handles

It is recommended to print the handles horizontally to significantly increase tensile strength.

You will also need:
• 4 x M5x10x7 threaded inserts
• 4 x M5x35 countersunk screws
• 2 x M5x70/80 countersunk screws (if you print the extensions as well)

Currently, I’ve only made a version with a single hot shoe mount for one microphone. In the future, I plan to add more or include additional threaded inserts.