Celtic Skull - Hueforge

Sized so you can print the frame on a standard sized printer. See frame recommendation below. This one is quite a bit thicker than my usual Hueforge prints, the black parts were way too floppy without the added thickness. I know it may seem like overkill with 5 colors for this print, but it really does bring out the detail and subtle shading better, I tried it with 3 and 4 colors and wasn't happy.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 180x180mm in size

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyLite Dark Grey Transmission Distance: 1
PLA PolyLite Steel Grey Transmission Distance: 1
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite Pro White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with Charcoal Black
At layer #15 (1.28mm) swap to Dark Grey
At layer #18 (1.52mm) swap to Steel Grey
At layer #22 (1.84mm) swap to Grey
At layer #27 (2.24mm) swap to White for the rest.

I recommend this frame: [https://www.printables.com/model/518556-parametric-frame-for-hueforge-filament-paintings](https://www.printables.com/model/518556-parametric-frame-for-hueforge-filament-paintings)

It's a great design and you can set it for any size hueforge print you want. You can use the free version of Fusion360 to create new sizes easily, don't be afraid to try it out even if you've never used Fusion360 before.

Enjoy!