For the upcoming Minecraft Movie, my son wanted some gifts for his friends for his part at the theatre watching the movie. 

Inspired by my other online design, I modelled this fun light box with the theme of Minecraft Ore. I wanted to give more detail to the design to represent that of the ore in the game.

The print is a quick print design that allows inserting a standard (37mm) LED tealight. 

PRINT SETTINGS

OUTTER SHELL

  - Print with no supports if your printer is ok with bridging. 

  - Print with open end facing up

 - 0.4mm nozzle

 - 0.1mm first layer height. 0.2mm layer height for other layers

 - No Infil

 INSIDE SHELL

 - No support

 - Print open end facing up

 - 0.4mm Nozzle

 - 0.1mm first layer height. 0.2mm layer height for other layers

 - No Infil

BASE

 - No support

 - Print open end facing up

 - 0.4mm Nozzle

 - 0.1mm first layer height. 0.2mm layer height for other layers

 - 15% Infill

ASSEMBLY. 

 - Insert light into Base

 - Insert the inner shell into the outershell. Take care not to crack the shell. 

 - You may have to glue the light in place if it's loose. There are some variations in light sizes. 

 - Clip base to outer shell

LED Used was from Amazon. Link Below

LINK TO LED