Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 55x163.63mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 1.9mm and the Actual Depth is 2mm

Filaments Used:
    PLA Aurapol Black Transmission Distance: 0.4
    PLA Aurapol Grandma Gray Transmission Distance: 3.7
    PLA Aurapol White Transmission Distance: 2.7
This print uses 3 unique filaments (You can also use similar colors from other manufacturers)

Swap Instructions:
    Start with Black
    At layer #14 (1.2mm) swap to Grandma Gray
    At layer #22 (1.84mm) swap to White for the rest.