Fidget Screw with 45° Thread – No Support Needed!

This fidget screw features a 45-degree thread, allowing you to easily loosen the nut by simply spinning it multiple times when tight. The nut stays secure in place, but with a quick flick, it effortlessly unscrews—making it a fun and satisfying desk toy!

Designed for Easy Printing:

✅ Chamfered nut & base – Optimized for printing without supports.
✅ 45° thread – Engages smoothly and improves printing experience.
✅ Mid-print nut placement (no glue needed) – The nut must be carefully inserted 
mid-print. Pause the print between 30 mm and 45 mm, ensuring the nut is placed in the same orientation as printed, the bottom is flat, the top side has a chamfer on the inside (see picture).

Print in PLA or PETG for best results. Let me know how yours turns out! Happy printing!

Let me know if you need further tweaks! 😊

This model was inspired by Threaded Fidget by @DirkvK_1366229.